Customization: | Available |
---|---|
Application: | to Drive and Control The Speed of Motor |
Output Type: | Triple |
Still deciding? Get samples of US$ 4167/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Inverter Model | Power (KW) G/P |
Current (A) |
Dimension (mm) | |||||
H | H1 | W | W1 | D | d | |||
ZVF300-G110/P132T4M | 110/132 | 210/253 | 720 | 702 | 365 | 240 | 360 | 9 |
Inverter Model | Power (kW ) | Current(A) | Packing Size (mm ) | Gross Weight (kg) | Net Weight (kg) |
ZVF300-G110/P132T4M | 110/132kW 380V | 210A | 800*495*485mm/1PCS | 64kg | 57kg |
Ambient | Place to be used | Indoor location free from direct exposure to sun light, high humidity or dew condensation, high levels of dust, corrosive gas, explosive gas, inflammable gas, oil mist, salt and etc |
Altitude | Below 1000 M | |
Ambient Temperature | -10 C to +45 C (Bare Machine: -10 C to+50 C) | |
Humidity | 20%-90% RH without dew condensation | |
Vibration | <0.5G | |
Storage temperature | -20~+60C | |
Structure | Protection class | IP20 |
Cooling mode | Forced air cooling | |
Installation mode | Wall mounted or floor-type actuator |
Item | Item Description | |
Control Function | Automatic energy-saving operation | Auto optimize V/F curve according to the load changes to realize the energy saving operation. |
Auto voltage regulation(AVR) | When the network voltage changes, it can regulate PWM output automatically to maintain constant voltage. | |
Built-in PID | This can form a convenient closed-loop control system (CLCS)and is applicable to pressure control, flow control and other process control . | |
Operation Function | Operating command | Operation panel control ,external terminal control and COM control |
Frequency setting | Keypad potentiometer setting , operation panel UP ,DOWN setting,. external terminal UP/DOWN setting, analog voltage signal or external potentiometer setting , analog current signal setting .terminal combination setting ,485 COM setting and so on. | |
Input Signal | Forward/Reverse signal\multi-speed signal \fault signal \ reset signal etc. |
|
Output signal | Programmable relay\open collector output \Fault signal output. | |
Multi-function analog and digital output terminal | This can realize the output of frequency current and other physical quantity by output 0-10V or 0-20mA DC signal and 0-10KHz digital signal output. | |
Braking function | Dynamic braking | With an external braking resistor, the maximum braking torque may reach 100%. |
DC Braking | This can be selected when the motor starts or stops with the action frequency of 0-20Hz,action current level of 0-100% and actuation time of 0-30sec., which can be set in sequence. | |
Other Function | Skip frequency\Jog function\Counter \Rotation speed tracking\Momentary power loss restart \Frequency upper/lower limiting\Acceleration/ Deceleration mode can be adjusted \Frequency meter and Voltmeter output \Multi-speed/ program running \Two wire mode/ three wire mode control \Wobble frequency control\Multi-function input terminal selection \Fault auto reset\RS485 serial communication . | |
Protection Function | Input phase loss protection\Over current protection \Overload protection\Over voltage protection \Under voltage protection\Over heat protection ect. |